Quatech Audio/Video Capture USB 2.0 Spezifikationen PDF herunterladen (Seite 336)

13-18 z.one ultra and z.one ultra sp OPERATOR MANUAL

 If a low-level network connection has been made, the following

message appears:

ICMP Echo: xx.xx.xx.xx is alive [xx.xx.xx.xx is the IP address of the

configured device].

 If a connection has not been made, the following message appears:

ICMP Echo: xx.xx.xx.xx timed out [xx.xx.xx.xx is the IP address of

the configured device].

b. Select Verify.

 If a DICOM-level connection has been made, the following message

appears:

Verification of communication succeeded

 If a connection has not been made, the message Connection failure

displays. If so, repeat this procedure from Step 1 or contact your

network/PACS administrator.

7. To enable the Worklist, go to the DICOM Modality Worklist Administration

screen (

Figure 13-15), select the Worklist, and click Enable.

8. To exit, press Enter (Enter/Select for SmartCart sp) or Freeze to return to live

imaging.

Table 13-6. DICOM Worklist Server Parameters

Parameter Description

Nickname

e.g., Worklist Server

Informal name to identify the device to users in

the department. This name is typically

assigned in the department.

Application Title

e.g., WORK_1

Name assigned to the target DICOM Worklist

Server device by the PACS Admin to identify it

on the DICOM network.

IP Address TCP/IP network IP address assigned by the IT

Admin to the target DICOM Worklist Server

device.

Port Number TCP/IP port number assigned by the PACS

Admin for use by the DICOM Worklist Server

device. Default port value is 104.

Max PDU Receive/Send Size Size (in bytes) of the basic data packets (PDU)

that will be transferred during receive and

transmit operations (default is 16384 = 16K).

1 2 ... 331 332 333 334 335 336 337 338 339 340 341 ... 403 404

Keine Kommentare

Quatech Audio/Video Capture USB 2.0 Spezifikationen Seite 336