Quatech Audio/Video Capture USB 2.0 Spezifikationen Seite 108

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 404
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 107
7
7-4 z.one ultra and z.one ultra sp OPERATOR MANUAL
4. When the Patient Information form is complete, select Exit or press Freeze to
save the form and return to the image display.
Exam Basics: Begin, Close, Restart
NOTE: If DICOM is activated on your system, see “To Begin a New Exam From a
DICOM Worklist” on page 7-5.
To Begin a New Exam
1. Open a new Patient Information form (Figure 7-1):
2. SmartCart/SmartCart sp with MTP option – Select a transducer:
a. Using Trackball, point to down arrow of Xducer data field. Press Set
button to view drop-down list. Select desired transducer.
b. On the list, point to the desired transducer and press Set.
SmartCart/SmartCart sp without MTP – Go to Step 3.
3. Select the Exam type and Preset:
a. Using the Trackball, point to the down arrow of the Exam data field. Press
Set to drop down the selection list. Select the correct Exam type.
NOTE: The Patient Information form configuration may change, depending on the
Exam type selected.
b. After selecting the Exam, the Presets menu automatically drops down with
the cursor on the first Preset of the menu. Select the desired Preset.
NOTE: The Presets menu will not appear unless a transducer is attached to the
system. Presets are transducer-specific. Make sure the correct transducer is
attached for the application.
NOTE: For those Exam types and Presets with calculation packages, selecting the
correct Exam type and Preset activates the measurement and calculation
packages.
Scan Engine
To delete text: Use Backspace on VKB to delete
single characters. Highlight entire data field
and use Backspace to clear entire data field.
To enter text: Use stylus on VKB.
SmartCart/SmartCart sp
Press the New Patient key on the upper left of the
keyboard.
Scan Engine
Tab to the Patient tab, then select New.
Seitenansicht 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 403 404

Kommentare zu diesen Handbüchern

Keine Kommentare