Quatech Audio/Video Capture USB 2.0 Spezifikationen PDF herunterladen (Seite 281)

z.one ultra and z.one ultra sp OPERATOR MANUAL 11-9



Still & Clip Image Store

The Store and/or Print buttons can be configured to send the currently displayed

still image (single frame) or a sequence of live imaging frames (clip image store in

live mode) to the internal hard drive.

Media Storage selections for each of the buttons is configured on the Image

Store/Print Button screen (

Figure 11-4).

 To Store Single-Frame Image (SmartCart/SmartCart sp/Scan Engine)

1. Press the Freeze button to freeze the image. Then press the appropriate

Store button to store the image.

While live imaging, press the Store button that has been configured for Still to

store the Still image capture.

Figure 11-5. Image Store/Print Button Screen (detail) - Live Capture Still

2. The System beeps and displays the message Saving to disk, which

disappears when the Store is complete.

NOTE: The Store and Print buttons may be configured to send images to DICOM

network storage devices and

DICOM printers in addition to local internal storage

media. See

Chapter 13 “DICOM and FTP Connectivity”.

 To Store Clip Image (SmartCart/SmartCart sp/Scan Engine)

NOTE: To set the duration when storing a Clip, press the Protocol button

(

SmartCart). For detailed information, see “Clip/Image Store (Protocol Button -

SmartCart only)” on page 7-12.

1. Achieve the desired scanning view of patient anatomy and continue live

scanning (do

not press Freeze button).

2. Press Store button configured for Clip (see Figure 11-5) to begin capture

(store) of clip image sequence.

3. The System beeps once to indicate storage has begun. A scrolling bar graph

displays (lower right corner of Image) showing progress of store sequence. At

end of store sequence, image will momentarily pause, and scrolling bar graph

disappears, giving user visual feedback. After pause, System starts to write

image data to internal hard drive. Another scrolling bar appears, and an icon

indicating store is in progress

displays.

4. When storage is complete, System beeps again. The scrolling bar graph

disappears from screen. An icon indicating store is complete

displays.

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 403 404

Keine Kommentare

Quatech Audio/Video Capture USB 2.0 Spezifikationen Seite 281