Quatech Audio/Video Capture USB 2.0 Spezifikationen PDF herunterladen (Seite 197)

z.one ultra and z.one ultra sp OPERATOR MANUAL 8-13

Graphics Procedures - SmartCart/SmartCart sp

See “Body Pattern Graphics” on page 17-9 for a complete list of the available

Body Pattern graphics and associated Exam Types. See “List Keys/Annotation

Configuration” on page 8-2 for information on configuring Body Pattern graphics.

 To Activate Display of Body Patterns

Press the Body Pattern key on the SmartCart/SmartCart sp QWERTY keyboard.

An initial default Body Pattern specific to the Exam type in use will appear at the

bottom of the display. The Annotation and Body Pattern softkeys will also display.

NOTE: The Body Pattern key on QWERTY keyboard is a toggle ON/OFF function.

 To Change Body Patterns

Rotate the Body Pattern softkey left or right to sequence through the available

body patterns until the desired pattern is displayed.

 To Position Transducer Graphic

In addition to the selected body pattern, a transducer (transducer) graphic will be

displayed in green within the body marker. The message Probe graphic

positioning also displays. The probe graphic may be positioned and rotated by

using either the

Trackball or the positioning and rotation softkeys.

 To Position Probe Graphic Using the Trackball

1. Use the Trackball to position the probe graphic.

2. When the probe graphic is positioned correctly, press the Set button. The

probe graphic position locks and a message Probe graphic rotating displays.

3. Use the Trackball to rotate the probe graphic.

4. When the probe graphic is correctly rotated, press the Enter, Back, Tab, or

Freeze button. This locks the probe graphic and exits Body Patterns. The

probe graphic now displays in white and no messages display.

 To Position Probe Graphic Using the Softkeys

1. Rotate the Position softkey left/right (see Figure 8-6) to position the probe

graphic. Press the softkey to change from lateral positioning to vertical

positioning.

2. Rotate the Rotate softkey left/right (see Figure 8-6) until the probe graphic is

correctly rotated.

3. When the probe graphic is correctly rotated, press the Enter, Back, Tab, or

Freeze button. This locks the probe graphic and exits Body Patterns. The

probe graphic now displays in white and no messages display.

 To Remove Body Patterns From Display

Press the Body Pattern key a second time.

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 403 404

Keine Kommentare

Quatech Audio/Video Capture USB 2.0 Spezifikationen Seite 197