Quatech AirborneDirect WLNG-ET Series Spezifikationen PDF herunterladen (Seite 42)

2 – CLI Commands

Page 36 Airborne™ Product Family CLI Reference Guide 100-8005-101G

Quatech, Inc. Confidential

Command CLI Arguments Ln Description

pw-cfg <string> L3 Configures the Level 3 Password [31 characters, no spaces].

Default is cfg.

pw <string> L2 Configures the Level 2 Password [31 characters, no spaces].

Default is password.

logout L1 Return to Level 1.

restart L2 Restarts the Module firmware, reinitializing everything in the

system like a power cycle. All system configuration parameters

that have not been saved with the commit command will be

reinitialized to system defaults. All connections on the wireless

interface will be disconnected abruptly.

update L2 Updates the Module’s firmware using XMODEM. When using

terminal emulation software on a workstation as the serial host,

the terminal emulation software may prompt the user for the

filename to proceed. However, if used in an embedded system,

the XMODEM protocol will complete the transaction. Please see

“Data Bridging with XMODEM Guidelines” for more details.

After the update is completed, the Module restarts automatically.

Execute this command from the serial interface, with hardware

handshake enabled (not soft handshake).

time L2 Reports the number of seconds that the Module has been

operational. The accuracy of the internal timer is not guaranteed

when power modes are active.

reset L3 Restores all system configurations to the OEM defaults. This

has the same effect as using the “factory reset” button at power-

up.

2.2.9 I/O Commands — WLN ONLY

Command CLI Arguments Ln Description

io-read

e | f<portid>

L2 Reads the digital I/O port.

<port id> = a bit number from 0-7.

Returns the state of the I/O port.

Example: io-read e4

io-write

e | g<portid> <num>

L2 Writes a value to digital I/O port <num>.

<portid> = a bit number from 0-7 (or as allowed by the Signal

Assignments tables in the Airborne™ Wireless LAN

Node Module Data Book), if the direction has been

set as output.

<num> = 0 or 1.

Writing to a bit position that has been configured as an input

has no effect. Writing to port G3 has no effect.

io-dir-e [integer] L2 Sets the direction of port E I/O bits to input or output.

8 bits

Bit setting of 1 = Input, 0 = Output.

Bits 3-0 = don’t care

Bits 7-4 = must be 0 or 1

Default is all inputs. Requires restart to take effect.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 61 62

Kommentare zu diesen Handbüchern

Keine Kommentare

Quatech AirborneDirect WLNG-ET Series Spezifikationen Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Quatech AirborneDirect WLNG-ET Series