Quatech AirborneDirect WLNG-ET Series Spezifikationen PDF herunterladen (Seite 30)

2 – CLI Commands

Page 24 Airborne™ Product Family CLI Reference Guide 100-8005-101G

Quatech, Inc. Confidential

Command CLI Arguments Ln Description

wl-security [disable | wep64

|wep128 | wpa-psk

| wpa-leap

| wpa-leap64

| wpa-leap128

| wpa-psk64

| wpa-psk128]

L3*

Selects the Wireless Security Method for Authentication and

Encryption

This command replaces the wl-wep command. When

wl-security is configured for a value other than disable, the

value for wl-wep is not evaluated for operation. However, when

wl-security is configured for disable, the value of wl-wep

takes effect.

Disable = security is disabled. (default)

wep64 = 64-bit key length (sometimes referred to as 40-bit)

wep128 = 128-bit key length

wpa-psk = WPA Pre-Shared Key

wpa-leap = WPA CISCO LEAP

wpa-leap64 = Migration mode w/ Cipher suite TKIP+40-bit WEP

using EAP (LEAP). Requires LEAP username and

password.

wpa-leap128 = Migration mode w/ Cipher suite TKIP+128-bit WEP

using EAP (LEAP). Requires LEAP username and

password.

wpa-psk64 = Migration mode w/ Cipher suite TKIP+40-bit WEP

using WPA PSK. Requires WPA Passphrase.

wpa-psk128 = Migration mode w/ Cipher suite TKIP+128-bit WEP

using WPA PSK. Requires WPA Passphrase.

Default is disable.

pw-wpa-psk <string> L3* Configures the Pre-Shared Key used with WPA-PSK security. The

input range is 8 to 63 ASCII characters or 64 hex characters. This

key must match the key on the AP.

pw-leap <string> L3* Configures the WPA-LEAP password. The LEAP password [1 to 32

characters] must match the LEAP password assigned to the LEAP

user on the LEAP server. The LEAP password cannot contain

spaces.

user-leap [string] L3* Configures the WPA-LEAP username. The LEAP username [1 to 32

characters] must match the LEAP username assigned on the LEAP

server.

wl-auth [string] L3* Configures the authentication type when WEP 64 or 128 is used.

auto = authenticates using Open Key algorithm (default)

open = authenticates using Open Key algorithm

shared = authenticates using Shared Key algorithm

wl-def-key [integer] L3* Configures the default WEP key index. This must match the key

index configured on the AP.

Range is 1 – 4.

Default is 1.

wl-wpa-format [0 | 1] L3* WPA information Element type selection

0 = Use 802.11i WPA RSN IE (default)

1 = Use legacy WPA RSN IE

wl-key-1 <aschex> L3* Sets WEP Key #1 to binary value.

[10 or 26 hex digits] – 10 digits for 64 bits, 26 for 128 bits.

Default is 00000000000000000000000000.

wl-key-2 <aschex> L3* Sets WEP Key #2 to binary value.

[10 or 26 hex digits] – 10 digits for 64 bits, 26 for 128 bits.

Default is 00000000000000000000000000.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 61 62

Kommentare zu diesen Handbüchern

Keine Kommentare

Quatech AirborneDirect WLNG-ET Series Spezifikationen Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Quatech AirborneDirect WLNG-ET Series