Quatech AirborneDirect WLNG-ET Series Spezifikationen PDF herunterladen (Seite 32)

2 – CLI Commands

Page 26 Airborne™ Product Family CLI Reference Guide 100-8005-101G

Quatech, Inc. Confidential

Command CLI Arguments Ln Description

wl-status L2 Reports abridged Module status. Below is a sample of the report.

See Table 4 for a detailed description of the report.

Link Status: Connected

SSID: FirstAccessPoint

BSSID: 0006255D537D

signal level (dBm): -56

noise level (dBm): -92

current channel: 1

dhcp status: 0x02

The following example shows a response if the Module is not

associated. The SSID and BSSID values are valid if the Module is

disassociated from an AP and can be used to determine this

condition.

Link Status: Not Connected

SSID: FirstAccessPoint

BSSID: 000000000000

signal level (dBm): -99

noise level (dBm): -99

current channel: 1

dhcp status: 0x00

wl-info L2 Reports more comprehensive Module status. Below is a sample

report indicating that the Module is associated. For a detailed

description of these results, see Table 4.

Module Firmware Version: 4.3.0.19

Radio Firmware Version: CF8385-5.0.17.p2

Link Status: Connected

SSID: FirstAccessPoint

MAC Address: 0090C9004A80

BSSID: 00095B6F270C

Transmit Rate (Mb/s): 1

Signal Level (dBm): -41

Noise Level (dBm): -92

Ip Address: 192.168.0.5

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.0.1

Primary DNS: 0.0.0.0

Secondary DNS: 0.0.0.0

NM Heap Free: 2415

VM Heap Free: 6685

Netpages Free: 122

Up Time (Sec): 2183

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 61 62

Kommentare zu diesen Handbüchern

Keine Kommentare

Quatech AirborneDirect WLNG-ET Series Spezifikationen Seite 32

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Quatech AirborneDirect WLNG-ET Series