Quatech SSP-300 Bedienungsanleitung Seite 47

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 53
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 46
6.3 Termination Resistors
No termination resistors are provided on the SSP-200/300 ports. Both output and input
signals are connected only to the external connector. Any termination which is required
must be added externally.
+
-
RS-422/485 Receiver
Rt
RXD+
RXD-
+
-
RS-422/485 Receiver
Rt
AUXIN+
AUXIN-
RS-422
100 ohm 1/2W resistor
RS-485
60 ohms total resistance
(120 ohms at each end)
Recommended Termination Resistor Values
Figure 0. RS-422/485 Termination
Hardware Information 6-5
Seitenansicht 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 53

Kommentare zu diesen Handbüchern

Keine Kommentare