Quatech SSCF-100 Bedienungsanleitung PDF herunterladen (Seite 7)

Quatech CompactFlash Card User’s Manual SSCF-100 / SSCFR-100

- 7 -

5.2 ELECTRICAL

All figures quoted are typical parameters @ 25°C

RS-232 SIGNALS: Typical output level ±5.5V (open circuit voltages)

ESD PROTECTION: All RS-232 signal lines on the SSCF-100 / SSCFR-100 card are

protected against electrostatic discharge (ESD)

• 15kv - human body model

• 8kv - IEC1000-4-2, contact discharge

• 15kv - IEC1000-4-2, air-gap discharge

UART CLOCK SPEED: x1: UART CLOCK is 1.8432MHz ->115.2KBaud max

x8: UART CLOCK is 14.7456MHz->921.6KBaud max

5.3 POWER CONSUMPTION

All figures quoted are typical parameters @ 25°C

VCC CURRENT: 20mA typical @ 5V, 13mA typical @ 3.3V

IN STANDBY MODE: 14mA typical @ 5V, 5mA typical @ 3.3V

5.4 MECHANICAL

CARD MASS: 10g typical.

FORM FACTOR: 36.4mm x 42.8mm x 3.3 mm overall card size

SSCF-100 CABLE: Detachable 300mm cable with DB-9 male connector

SSCFR-100 CABLE: Attached 3.9mm thick cable protrudes 10.3mm from the back edge

of the card. The oval cable measures approx. 7mm x 1.7mm with

shield and 9x 7/0.1mm conductors.

5.5 ENVIRONMENTAL

HUMIDITY: <80% non-condensing

TEMP: 0-50°C ambient

1 2 3 4 5 6 7 8 9

Keine Kommentare

Quatech SSCF-100 Bedienungsanleitung Seite 7