Quatech Serial Device Server Bedienungsanleitung PDF herunterladen (Seite 40)

Installing the device drivers Quatech SDS User’s Manual

Figure 29 - TCP/IP Network Configuration Parameters screen

Figure 30 shows the TCP/IP

network configuration parameters

including the following:

¾ Address type

¾ IP Address

¾ Subnet mask

¾ Default gateway

Step Procedure Description

 Step 38 If you are satisfied with the parameters,

press Next to continue.

If you are not satisfied, press Change

Properties to change the TCP/IP

properties.

The Rerun network connectivity test pop-

up box displays.

Continue with □ Step 39.

The Internet Protocol (TCP/IP)

Properties dialog box displays.

Go to

□ Step 32.

Figure 30 - Rerun network connectivity test pop-up box

Figure 31 shows the Rerun

network connectivity test pop-

up box.

Step Procedure Description

 Step 39 Press OK. The Network Connectivity Test screen

displays. Go to

□ Step 14.

Page 34 940-0183-153 July 2005

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 97 98

Keine Kommentare

Quatech Serial Device Server Bedienungsanleitung Seite 40