Quatech AirborneDirect ABDG-ET Series Betriebsanweisung PDF herunterladen (Seite 4)

AirborneDirect™ Serial Device Server Quick Start Guide Quatech, Inc.

100-8107-110 4 February 2011

The terminal emulator will attempt to connect to the IP address; if successful you will now be able to use

the WLAN interface for configuration of the device using the Command Line Interface (CLI).

For more information on the full CLI command set please refer to the Airborne Enterprise Command Line

Reference Manual.



Any of the available Terminal Emulation programs may be used. Please follow the specific applications

requirements to make the TCP/IP connection and authenticate with the module.

Express Setup Configuration Page

When the devices web interface is accessed for the first time an Express Setup page will be shown. This page is

designed to allow a quick device set-up by presenting the most popular device configuration options in a single

location. For more advanced configurations the full set of options are available in the feature links (left-hand

column).

The Express Setup web page will only display the necessary fields based upon the selections made during

configuration. The Express Setup page looks like:

Figure - Express Setup Page

To configure the device for operation each field must be configured correctly. The following steps should be taken

to configure the device (Note: not all fields will be visible):

Table - Express Page Setup

Step

Description

Navigation Bar

Select Configuration

You will see a group of fields under the banner of WLAN Parameters.

Feature Link

Select Express Setup

This step is optional. If this is the first time the device has been

configured this page will automatically be displayed.

1 2 3 4 5 6 7 8 9

Keine Kommentare

Quatech AirborneDirect ABDG-ET Series Betriebsanweisung Seite 4