Quatech WLNG-ET-DP500 Series Bedienungsanleitung PDF herunterladen (Seite 33)

Quatech, Inc. Company Confidential

100-8081-100 Airborne CLI Reference Manual 33

Command

Description

Security (various commands)

It is necessary to configure this interface for the

appropriate security profile required for authentication to

the target network. Please see section 10.0 for details on

configuring the security profile.

http-port

This parameter allows directed traffic on the http port 80

to be directed to either the Airborne device server or the

device connected on the wired port.

If enabled all traffic on the http port will be handled by

the Airborne device.

If the application requires that a web server on the host,

attached to the wired port, respond to web page accesses

this parameter must be disabled.

telnet-port

This parameter allows directed traffic on the telnet port

23 to be directed to either the Airborne device server or

the device connected on the wired port.

If enabled, all traffic on the telnet port will be handled by

the Airborne device.

If the application requires that a telnet server on the host,

attached to the wired port, respond to remote accesses

this parameter must be disabled.

The public address becomes the target address for all accesses to the host

device connected to the private network. In the example shown in Figure 6, any

device on the public network wanting to communicate with the Host device (IP:

192.168.2.100), would use the IP address 123.45.67.89, the Airborne Ethernet

Bridge will forward all traffic to the private address 192.168.2.100.

The network infrastructure will show the MAC and IP address of the Airborne

Bridges wireless interface as the network presence, as a consequence of this all

traffic will be identified as being from or to this address.

Figure 6 - Airborne Ethernet Bridge IP Configuration

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 119 120

Keine Kommentare

Quatech WLNG-ET-DP500 Series Bedienungsanleitung Seite 33