Quatech QSC-100 Bedienungsanleitung PDF herunterladen (Seite 24)

5.3.1 QTPCI.EXE

Quatech's "QTPCI" utility supplies the information required when modifying the serial

port settings of the application. This program should be run from real DOS, not in a Windows

DOS box.

Figure 4 shows the Basic Mode display for the QSC(LP)-200/300 after the "Q" key has

been pressed. In this example, the QSC(LP)-200/300 uses I/O base address FFA0 hex and IRQ 3.

The hardware revision of the QSC(LP)-200/300 is also displayed. Pressing the "N" key will show

similar information for all non-Quatech PCI devices in the system, including those devices

integrated on the motherboard.

The QTPCI program is capable only of displaying the PCI configuration. It cannot be used

to make changes.

Figure 4 --- QTPCI.EXE Basic Mode display

Quatech QSC(LP)-200/300 User's Manual 22

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 33 34

Keine Kommentare

Quatech QSC-100 Bedienungsanleitung Seite 24